Hide

Problem A
Rain Fall

Rainfall is measured in millimeters. The rain is collected in a vertical transparent tube with millimeter markings, and once the rain has stopped falling, one can check the height of the water in the tube.

In our problem, the tube unfortunately has a leak at height $L$ millimeters (mm). If the water level is above the leak then water drains from the tube at a rate of $K$ millimeters per hour (mm/h).

We want to figure out how much rain fell during a particular rainfall. We assume that the tube is high enough that it does not overflow. We also assume that rain falls at an (unknown) uniform rate during a rainfall, and that water does not evaporate from the tube. The height of the leak itself is also negligible.

Input

The input is a line with five positive numbers: $L$ $K$ $T_1$ $T_2$ $H$ where

$L$

is where the leak is (mm)

$K$

is the rate at which water leaks (mm/h)

$T_1$

is the duration of the rainfall (h)

$T_2$

is the time between the end of the rainfall and the observation of the water level (h)

$H$

is the water level in the tube when we observe it (mm)

Each number is at least $0.01$ and at most $1000.00$, and each is given with exactly two decimals.

Output

One line with two floating point numbers $F_1$ $F_2$ where $F_1$ is the smallest rainfall in millimeters that would result in the given observation, and $F_2$ is the largest rainfall in millimeters that would result in the given observation. Values with either absolute or relative error smaller than $10^{-6}$ are acceptable.

Sample Input 1 Sample Output 1
80.00 0.50 2.00 1.50 80.00
80.000000 80.759403
Sample Input 2 Sample Output 2
150.00 1.00 100.00 150.00 100.00
100.000000 100.000000

Please log in to submit a solution to this problem

Log in